Tank Bottom Valve

Manual tank bottom valve

●Manual tank bottom valve is a pneumatically operated single seat valve which is assembled at the bottom of tank,used in diary,food processing, beverage,pharmaceutical and fine chemical industries.
●Tank bottom valve is used to vent the container material and the material will not be stuck in the valve chamber, the design of the seat open to the inside of the container. It avoids the over voltage because the pipe leads to the possibility of accidental opening of the valve. The tank bottom valve has 45 ° and 90 ° two designs, pneumatic and manual interchangeable.

●Size:DN25/1" to DN100/4"
●Temperature :130℃
●Pressure:10bar
●Air supply:4-7bar
●Material:ASTM 304/1.4301,316L/1.4404
●Gaskets:EPDM、FPM、HNBR,FDA177.2600
●Treatment:Ra<0.8μm
●Certificate:3-A-53-06,PED/97/23/EC,FDA177.2600

Powder tank bottom butterfly valve

DJ-FDT butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal opening and closing does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body, and adjustable pressure. The valve does not require professional tools to be disassembled, maintained,
cleaned, safe, reliable, low cost, simple to operate, and can be interchanged manually, pneumatically, or electrically.
Specifications: 4''-10'', DN100-DN250
Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILCON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matt (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.

Tank bottom ball valve

The tank bottom ball valve is used for pressure vessels and storage tanks of draining and discharging with the fully inclusive designed ball seat and compensation automatic type sealing . So it has advantage of high pressure, high temperature resistance, small torque, long life and other characteristics to meet CIP and SIP cleaning and sterilization. It is very suitable for the application in high cleanliness requirements in process systems such as pharmaceutical, food and beverage, dairy products, chemical industry etc..
◆ Tank bottom ball valve can configure a variety of different actuators, electric, pneumatic and manual are interchangeable.

Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max.Pressure:Vacuum -10bar
●Operating torque is small
●Excretable
●No matter what the flow fluid is, the handle can be mounted on the side of the valve body
●No matter what kind of connection is, the valve can be replaced without change the length of valve.

Manual tank bottom ball valve

◆The tank bottom ball valve is used for pressure vessels and storage tanks of draining and discharging with the fully inclusive designed ball seat and compensation automatic type sealing . So it has advantage of high pressure, high temperature resistance, small torque, long life and other characteristic to meet CIP and SIP cleaning and sterilization. It is very suitable for the application in high cleanliness requirements in process systems such as
pharmaceutical, food and beverage, dairy products, chemical industry etc..
◆Pneumatic tank bottom ball valve can configure a variety of different actuators, electric, pneumatic and manual are interchangeable.

Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max.Pressure:Vacuum -10bar
●Operating torque is small
●Excretable
●No matter what the flow fluid is, the handle can be mounted on the side of the valve body
●No matter what kind of connection is, the valve can be replaced, without change the length of valve

Manual tank bottom valve

Tank bottom valve is used to vent the container material and the material will not be stuck in the valve chamber, and the design of the seat opens to the inside of the container. It avoids the overvoltage because the pipe leads to the possibility of accidental opening of the valve. The tank bottom valve has 45 ° and 90 ° two designs, pneumatic and manual interchangeable.
●Size:DN25/1" to DN100/4"
●Temperature :130℃
●Pressure:10bar
●Air supply:4-7bar
●Material:ASTM 304/1.4301,316L/1.4404
●Gaskets:EPDM、FPM、HNBR,FDA177.2600
●Treatment:Ra<0.8μm
●Certificate:3-A-53-06,PED/97/23/EC,FDA177.2600

Pneumatic Tank bottom valve

●The tank bottom seat valve is a pneumatically operated single seat valve, which is assembled at the bottom of tank,used in diary,food processing, beverage,pharmaceutical and fine chemical industries.
●Tank bottom valve is used to vent the container material and the material will not be stuck in the valve chamber, and the design of the seat opens to the inside of the container. It avoids the overvoltage because the pipe leads to the possibility of accidental opening of the valve. The tank bottom valve has 45 ° and 90 ° two designs, pneumatic and manual interchangeable.
●Size:DN25/1" to DN100/4"
●Temperature :130℃
●Pressure:10bar
●Air supply:4-7bar
●Material:ASTM 304/1.4301,316L/1.4404
●Gaskets:EPDM、FPM、HNBR,FDA177.2600
●Treatment:Ra<0.8μm
●Certificate:3-A-53-06,PED/97/23/EC,FDA177.2600

Horizontal Pneumatic Butterfly Valve

Butterfly valve, both manual and automatic operation, can be used in industrial applications in fluid products, such as food processing, pharmaceutical and chemical industries.
Size: DN10-DN300, 1/2 -12 "
Temperature: 130℃
Pressure: 10bar
Material: ASTM T304/T316L, 1.4301/1.4404
Connection: flange, Weld, Clamp, Thread, etc.
Operation standard: DIN SMS RJT 3A ISO IDF
Pneumatic Operation: Single action, Double action
Certificate: PED/97/23/EC, health wading license

Pneumatic Tank Bottom Diaphragm Valves

Pneumatic tank bottom diaphragm valve is specially used for discharging medium from tanks, no resort at the chamber.
◆ Size: 1"-4", DN25-DN100
◆ Highest Temperature: -30 to 150 ℃ (Depending on diaphragm) (Stainless steel actuator)
◆ Highest Temperature: -30 to 130 ℃ (Depending on diaphragm) (Plastic actuator)
◆ Maximum Pressure: Unidirectional (DELTA P = 100%)
Normally closed rubber 8bar, PTFE 6bar (option)
Normally closed rubber 6bar, PTFE 4.5bar (standard)
Normally open and double acting rubber 8bar, PTFE 6bar
◆ Facelift different actuators can meet higher pressure rating
◆ Forged Body: 1.4404 / 316L /1.4435 NB2
◆ Cast body: 1.4404 / 316L
◆ Connection: Weld, Clamp, Flange, Thread
◆ Body Structure: 2 channels, 3 channels, etc.
◆ Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
◆ Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600

Manual diaphragm tank bottom valve

Manual tank bottom diaphragm valve is specially used for discharging medium from tanks, no resort at the chamber.
◎ Size: 1"-4", DN25-DN100
◎ Pressure: 10bar (145 PSI)
◎ Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
◎ Temperature: -20 ℃ + 150 ℃
◎ Connection: Weld, Clamp, Thread, 3A BPE DIN SMS IDF ISO
◎ Body structure: U type tee + sampling valve; U-type links
◎ Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
◎ Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600

Multi-channel bottom diaphragm valve MG-32B

Multi-channel bottom diaphragm valve MG-32B
2 control valves, 3 ports
A water point valve seat
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404,1.4435 NB2 Fe<0.5%
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Multi port Diaphragm Valve M-53A

Multi port Diaphragm Valve M-53A
3 control valves, 5 ports
A water point valve seat
Two integrated closed-loop sampling valve seats
Suggest S1 up installation
Dead zone = ≤ 1D
Size: 1"-2", DN25-DN50
Material: 316L/1.4404, 1.4435 NB2 Fe<0.5%
Temperature: -20℃ +150℃
Pressure: 10bar
Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
Operations: Manual/Pneumatic
Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

File Description Language Size
Tank Bottom Valve Single-seat tank bottom valve includes: valve core shrink type, valve core out type, manual, pneumatic, electric and other tank bottom valves English 1.78MB)
Anti-Mix Tank Bottom Valve Two-way, three-way, four-way and five-way anti-mixing tank bottom valves English 10.01MB)

Get A Free Quote

Get A Free Quote
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All