Double seat valve

Mixproof valve manifold

Mixproof valve manifold

The manifold can be assembled by containers with various functions together. It can improve working efficiency of system and control the whole production process. The manifold can choose any flexible hose pipe and jet deviator to change the flexure automatically. The kind of automatic operation is safe, flexible and effective. One set of manifold can served to multi pipelines. Meanwhile other containers are filled in or empty, operator can clean up any one of them. The liquid won't be polluted.
Size:1.5"-DN40 to 4"-DN100
Manifold:from 4 up to 48 valves
Temperature:130℃
Pressure:10bar
Air supply:5-7bar
Control Systems
◆With a simple C-TOP on every pneumatic actuator (solenoids and sensors)
◆With a C-TOP of AS-I field bus
◆Without C-TOP, solenoids are installed in the control panel and sensors on the pneumatic actuator
◆PLC control
◆The states of the valves can be displayed on the control panel

Mixproof tank bottom valve

Mixproof tank bottom valve

Mixproof tank bottom valve, the concept of this double seat valve is characterized by excellent flexibility and easy operation. The typical design let you feel the most perfect body assembled and equipment in all mixproof tank bottom valve.This kind valve is automatic operated through compressed air. The mixing proof valve is constructed with two independent valve core seal .When valve is closed ,the two seal will interlinks to atmosphere .If the liquid is leaking,it will be let out by leakage chamber. At the same time you will see valve have problem or not and some information of destroyed seal , prevent leakage and failure caused by the two media mixing. When the valve is open, the leakage chamber is closed.

●Size: DN40-1.1/2"to DN100-4"
●The valve is equipped with a normally closed pneumatic actuator
●Forged ball valve body
●Compact design
●If there is a gush of fluid leaks from bottom of valve tube, you can determine whether the seal is damaged
●Easy to remove( just removing the clamps is enough)
●Welded connection (mm or inch)
●Balance Protection Design
●Max.Operating Pressure:10bar
●Min.Operating Pressure:Absolute vacuum
●Working temperature:-10℃ - 130℃(140℃ For short periods or disinfection)
●Certificate:3-A-85-03,PED/97/23/EC,FDA177.2600

Mixproof valve / double seat valve

Mixproof valve / double seat valve

Mixproof valve / double seat valve
Mixproof valve / double seat valve
◆Size:DN40-1.1/2" to DN100-4"
◆Material:ASTM 316L,1.4404
◆Pressure:10bar
◆Temperature:130℃
◆Gaskets:EPDM,FPM,FDA177.2600
◆Surface finish:Ra≤0.8μm
◆Air supply:5-7bar
◆Certificate:3-A-85-03,PED/97/23/EC,FDA177.2600
Control unit
●Power Supply :DC 24V±10%
●Single-acting (standard), double acting (option)
●Self-adjusting valves feature feedback
●Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
●Support AS-I BUS
●Supports manual and automatic operation

Mixproof valve / double seat valve

Mixproof valve / double seat valve

applications.
◆Mixproof valve is a high degree of double-seal valve. Through the interface between two fluids, this system can be implemented in two body synchronization process, preventing the possibility of contaminating materials. leakage chamber and leak detector is self- cleaning by valve seat.
●Size:DN40-1.1/2"to DN100-4"
●The valve is equipped with a normally closed pneumatic actuator
●Forged ball valve body
●If there is a gush of fluid leaks from bottom of valve tube, you can determine whether the seal is damaged
●Easy to remove( just removing the clamps is enough)
●Welded connection (mm or inch)
●Balance Protection Design
●Max.Operating Pressure:10bar
●Min.Operating Pressure:Absolute vacuum
●Working temperature:-10℃ - 130℃(140℃ For short periods or disinfection)
●Certificate:3-A-85-03,PED/97/23/EC,FDA177.2600 ●Compressed air pressure:5bar-7bar
●Gas connection:R1/8"(BSP)

Mix proof Butterfly Valve Type A

Mix proof Butterfly Valve Type A

The mixproof butterfly valve as a process element for the separation of media, is suitable for a variety of applications:
●In CIP systems, for separating CIP cleaning fluid
●In flush-out processes
●In water management
●Part of pipeline separates material
●In CIP/gas management (breweries)
●Storage tanks for separating product/CIP
● As CIP reflux valve in the the manifold
● Especially for liquids and no suspension / gas medium particles.
Size: DN25-DN100, 1"- 4"
Material: 1.4404 / 1.4301, 304/ 316L
Maximum Temperature: -10 ℃ - 130 ℃
Maximum Pressure: 10bar
Operation: Pneumatic/ Manual interchangeable
Control Box: C-TOP Basic type, C-TOP + AS-I communication
Seal: EPDM (standard) FPM / SILICON / NBR, FDA177.2600

Mix proof Butterfly Valve type B

Mix proof Butterfly Valve type B

Double seat butterfly valves can be used in food-processing, pharmacy and chemical industries. The Butterfly Valve offers an easy and safe separatation of products and prevents accidental mixing in case of gasket damage. It is often used to isolate materials that require safe separation and CIP Liquid in a single point (not in manifolds), or at the end of a manifold (e.g. CIP return) or entry of a CIP solution into a tank (through a cleaning ball).

File Description Language Size
Anti-mixing valve / double seat valve Two-way, three-way, four-way, five-way, six-way, seven-way and other structures English 10.01MB)
Valve controller Contains, valve positioner, valve control unit, valve position feedback English 4.66MB)
Single seat valve Manual, pneumatic, electric, two-way, three-way, four-way, five-way, six-way, seven-way, etc. English 3.18MB)
Butterfly valve Butterfly Valves for Straight, Tee, Multi-pass, Flange, Thread, Wafer, Powder, etc. English 4.87MB)