Get A Free Quote
Specifications:1/2"-4",DN10-DN100
Material:CF8/304,CF8M/316
Strength test pressure:1000WOG,2000WOG
sealing pressure:1.6Mpa
Applicable temperature:-40℃-180℃
Connection mode:BSP/BSTP/NPT,Butt / Socket Weld
Pneumatic three-piece ball valve
Specification 1/2"-4", DN10-DN100
Material: CF8, CF8M
Pressure: 1.0Mpa
Temperature: -40 ° C to 180 ° C
Integral leak-proof ball valve
Nominal pressure:PN1.6,2.5,4.0,6.4MPa
Strength test pressure:PT2.4,3.8,6.0,9.6MPa
Low pressure seal pressure test:0.6MPa
Applicable temperature:-40~180℃
Material:CF8、CF8M
Three-way female threaded ball valve
Specifications:DN8-DN50,1/2"-2"
Material:CF8、CF8M
Applicable temperature:-40~180℃
Nominal pressure:PN1.6,2.5,4.0,6.4MPa
Thin Type Flange Ball Valve
◎Specifications:DN15-DN100
◎Nominal Pressure:PT1.6, 2.5, 4.0, 6.4MPa
◎Strength test Pressure:PT2.4, 3.8, 6.0, 9.6MPa
◎Low Pressure Seal Pressure Test:0.6MPa
◎Applicable Medium:Q41F-(16-64)C water, oil, gas
Q41F-(16-64)P nitric acid
Q41F-(16-64)R acetic acid
◎Applicable Temperature:-40~180℃
◎Material:CF8、CF8M
Specifications:1/2"-4",DN10-DN100
Material:CF8/304,CF8M/316
Strength Pressure:1000WOG,2000WOG
sealing pressure:1.6Mpa
Applicable temperature:-40℃-180℃
Connection mode:BSP/BSTP/NPT,Butt / Socket Weld
Specifications:1/2"-4",DN10-DN100
Material:CF8/304,CF8M/316
Strength Pressure:1000WOG,2000WOG
sealing pressure:1.6Mpa
Applicable temperature:-40℃-180℃
Connection mode:BSP/BSTP/NPT,Butt / Socket Weld
Specifications:1/2"-4",DN10-DN100
Material:CF8/304,CF8M/316
Strength Pressure:1000WOG,2000WOG
sealing pressure:1.6Mpa
Applicable temperature:-40℃-180℃
Connection mode:BSP/BSTP/NPT,Butt / Socket Weld
The tank bottom ball valve is used for pressure vessels and storage tanks of draining and discharging with the fully inclusive designed ball seat and compensation automatic type sealing . So it has advantage of high pressure, high temperature resistance, small torque, long life and other characteristics to meet CIP and SIP cleaning and sterilization. It is very suitable for the application in high cleanliness requirements in process systems such as pharmaceutical, food and beverage, dairy products, chemical industry etc..
◆ Tank bottom ball valve can configure a variety of different actuators, electric, pneumatic and manual are interchangeable.
Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max.Pressure:Vacuum -10bar
●Operating torque is small
●Excretable
●No matter what the flow fluid is, the handle can be mounted on the side of the valve body
●No matter what kind of connection is, the valve can be replaced without change the length of valve.
◆The tank bottom ball valve is used for pressure vessels and storage tanks of draining and discharging with the fully inclusive designed ball seat and compensation automatic type sealing . So it has advantage of high pressure, high temperature resistance, small torque, long life and other characteristic to meet CIP and SIP cleaning and sterilization. It is very suitable for the application in high cleanliness requirements in process systems such as
pharmaceutical, food and beverage, dairy products, chemical industry etc..
◆Pneumatic tank bottom ball valve can configure a variety of different actuators, electric, pneumatic and manual are interchangeable.
Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max.Pressure:Vacuum -10bar
●Operating torque is small
●Excretable
●No matter what the flow fluid is, the handle can be mounted on the side of the valve body
●No matter what kind of connection is, the valve can be replaced, without change the length of valve
●The Electric butterfly ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torque moment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
Electric Actuator
Electric actuator: switch type, regulating type, passive contact
Power Supply:DC 24V AC 110V 220V
Opening and closing time:10/S-100/S
Torque:6N.M - 2000N.M
Protection grade: IP67
Explosion-proof: EX DII BT4 (option)
●Horizontal pneumatic butterfly ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
●Pneumatic butterfly type ball valve with C-TOP can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
Control Unit
●Control unit:DC 24V±10%
●Single-acting (standard), double acting (option)
●Self-adjusting valves feature feedback
●Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
●Support AS-I BUS bus
●Supports manual and automatic operation
●Pneumatic butterfly type ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
●Butterfly type ball valve can be installed in pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
Design Features
●Size:1"-4",DN25-DN100
●Material :304/1.4301,316L/1.4404
●Max. temperature:-30℃ - 130℃
●Max. pressure: Vacuum to 10bar
●Small torquemoment
●Excretable(Washable CIP) (option)
●Handle can be installed on the side of the valve body, no matter what the flow direction is.
●Valve body can be replaced in any connections. And the length will not change.
Horizontal pneumatic non-retention ball valve is full inclusive ball seat design that solves the problem of the liquid holdup of the valve cavity. The ball valve is suitable for bio pharmaceutical engineering.
Stem seal in patent design and spring in compensation type design have advantage of long life, low torque, long-term use under high temperature 150 ℃
Size: 1/2"-4",DN10-DN100
Temperature:-30℃ - 150℃
pressure:10bar
Material:304/1.4301,316L/1.4404
Surface:Ra≤0.5μm
Gasket:FDA 177.1550
Connection : Clamp, weld, thread,DIN,SMS,ISO,IDF,BPE,RJT
Electric Actuator
Function: switch type, adjustment type, passive contact
Power supply: DC 24V AC 110V 220V
The opening and closing time: 10/S-100/S
Torque: 6N.M to 2000N.M
Protection: IP67 grade
Explosion-proof: EX DII BT4 (option)
Electric non-retention ball valve is mainly used in the processing and beverage, wine, oil refining, cosmetics and chemical industries.
●Body Structure: straight way,3 way
●Size:1"-4",DN25-DN100
●Temperature:-20℃ - 120℃
●Pressure:10-bar
●Material:AISI 304 316L
●Certificate:PED,97/23EC
Clamp non-retention ball valve is in full inclusive ball seat design that solves the problem of the liquid holdup of the valve cavity The ball valve is suitable for bio-pharmaceutical engineering.
●Size:1/2"-3",DN10-DN80
●Material:304/1.4301,316L/1.4404
●Surface:Ra≤0.5μm
●Temperature:-30℃ - 150℃
●Pressure:10bar
●Valve combination clamp connection
●Without professional tools that disassembling the valve
●Small operating torque
●Gaskets:FDA 177.2600
●Connection : Clamp, weld, thread, DIN、SMS、ISO、IDF、BPE、RJT
●No matter what the connection mode is, the valve body can be replaced without changing the length of valve
Manual non-retention ball valve is full inclusive ball seat design that solves the problem of the liquid holdup of the valve cavity. The ball valve is suitable for bio pharmaceutical engineering.
Stem seal in patent design and spring in compensation type design have advantage of long life, low torque, long-term use under high temperature 150 ℃
Size:1"-4",DN25-DN100
Material:1.4301/304,316L/1.4404
Gasket:PTFE,TFM(FDA 177.1550)
Max. temperature:-20℃ - 150℃(Standard)-30℃ - 200℃(Option)
Pressure:10-30bar(Depending on seal material and temperature)
Manual, pneumatic, electric Exchange
●Without professional tools that disassembling the valve
●Small operating torque
●Gaskets:FDA 177.2600
●Connection : Clamp, weld, thread,DIN、SMS、ISO、IDF、BPE、RJT
●No matter what the connection mode is, the valve body can be replaced, the total length without changing the valve
Certificate:3-A-68-00,PED/97/23/EC
Proportional regulating ball valve, with a variety of structures, such as 3way, straight way, butterfly design, no dead angle design, can be applied to work in high requirements of clean environment, such as pharmaceutical, food and beverage, wine, chemical industry etc. The ball valve meets operating temperature up to 150℃, pressure up to 10bar, innersurface roughness Ra0.5 μ m and 3A standards and ASME BPE high purity
requirements
Signal Input:0/4-20mA,0-5/10V
Signal feedback output:0/4-20mA,0-5/10V
Supports bus:DEVICE NET BUS
Support manual operation
Single key self-tuning function
Power Supply:DC 24V ±10%
Size: 1/2"-4",DN10-DN100
Temperature:-30 ℃-150℃
Pressure:10bar
Material:304/1.4301,316L/1.4404
Surface:Ra≤0.5μm
Gaskets:FDA 177.1550
Connection : Clamp, weld, thread,DIN,SMS,ISO,IDF,BPE,RJT
No matter what the connection mode is, the valve body can be replaced
Certificate:3-A-68-00,PED/97/23/EC
File | Description | Language | Size |
---|---|---|---|
Ball Valve | Ball valve with various structures such as straight, three-way, multi-way, manual, pneumatic, electric, etc. | English | 5MB) |
Butterfly Valve | Straight, three-way, powder butterfly valve, pneumatic, manual, electric and various self-control butterfly valves | English | 4.87MB) |
Diaphragm Valve | Diaphragm valves of various types such as straight-through, three-way, multi-way, manual, pneumatic, electric, etc. | English | 10.51MB) |
Angle Seat Valve | Manual, pneumatic, electric, self-controlled angle seat valves | English | 6.78MB) |
Get A Free Quote