Get A Free Quote
Various Combinations Diaphragm Valve
The structures of valves have T-type,L-type, U-type, direct-way, multi-ports way, etc. It is mainly used in liquid sampling, biological systems, laboratories and other projects .
The valve is used in the pharmaceutical filling system with a particular advantage that opening and closing time can be up to 150 million life in 3 bar working pressure.
●Size: 1/4"-3/4"，DN6-DN15
●Standard: BPE 3A DIN ISO IDF
●Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600
●Max Temperature: -30℃ to 150℃ (Depending on seal material)(Stainless steel actuator)
●Max Temperature: -30℃ to 130℃ (Depending on seal material)(Plastic actuator)
●Max Pressure: One way (DELTA P=100%)
EPDM 8bar, PTFE 6 bar(Option)
EPDM 6bar, PTFE 4.5 bar(Option)
Double action EPDM 8 bar, PTFE 6 bar
●Assembling different actuators can meet higher pressure rating.
●Forged Body: 1.4404/316L/1.4435 BN2
●Cast Body: 1.4404/316L
●Connection: Clamp, Weld, Thread, Flange
●Operations: Manual and pneumatic
Multi functional high frequency canned diaphragm valve has a dual-station cylinder and a flow-adjustable filling valve.
For fast filling and to prevent spillage or spillage of the bottle.
The flow rate is maximum when 1 cylinder is working;
When the cylinder is working, the flow rate is the smallest, and the flow rate adjustment device can also be used to adjust the flow rate when the flow 2# cylinder is working.
●SIZE: 1/4 "-3/4", DN6-DN15
●Standard BPE 3A DIN ISO IDF
● Certification PED/97/23/EC, 3A/54-04/1580, FDA.177.2600
●Maximum temperature: -30 to 150 ° C (depending on the sealing material) (stainless steel actuator)
●Maximum temperature: -30 to 130 ° C (depending on the sealing material) (plastic actuator)
● Maximum pressure: one direction (DELTA P=100%)
Normally closed rubber 8bar, PTFE 6bar (optional)
Normally closed rubber 6bar, PTFE 4.5bar (standard)
Normally open and double acting rubber 8bar, PTFE 6bar
● Replacement of different actuators can meet higher pressure levels
●Forged valve body: 1.4404/316L/1.4435 BN2
● Casting valve body: 1.4404/316L
● Connection method: welding, clamp, flange, thread
●Operation mode: manual and pneumatic
Diaphragm regulating valves are mainly used in biopharmaceutical fluid control system. The design of valve is completely empty without dead angles, liquid contact parts are high purity stainless steel and PTFE material, so it is very suitable for high purity requirements of processing piping systems. The body structure has a variety of forms and combinations (Please refer to the DONJOY diaphragm valve data).
Analog input: 0/4-20mA, 0-5/10V
Power: DC24V ± 10%
Protection: IP68 rating
Support for manual operation
One-touch auto-tuning function
Size: 1"-4", DN25-DN100
Material: 1.4435NB2, 316L, 1, .4404, ASME BPE 316L
Highest Temperature: -30 to 150 ℃ (Depending on seal material) (Stainless steel actuators)
Highest Temperature: -30 to 130 ℃ (Depending on seal material) (Plastic actuator)
Maximum Pressure: Unidirectional (DELTA P = 100%)
Normally closed rubber 8bar, PTFE 6bar (Option)
Normally closed rubber 6bar, PTFE 4.5bar (Standard)
Normally open and double acting rubber 8bar, PTFE 6bar
Pneumatic Diaphragm Valve
●Diaphragm valves, manually or pneumatically operated, are specifically designed for hygienic and aseptic processes in the pharmaceutical industries.
●The valve is excellent for flow control as well as for open/close duties.
●The diaphragm provides body seal as well as seat seal. There are no paths to outside environment so it is suitable for aseptic processes.
● When valve is closed, a pressure pad which supports diaphragm to move towards sealing face on body. When pressure plate moves, diaphragm flexes and is forced down onto seat area in the centre of body, thus it closed off flow path through body.
● The interrelationship of body is to prevent the compression of diaphragm.
● The valve can be manually/pneumatically operated, and can be controlled by control tops and solenoid valves.
◎ Size: 1"-4", DN25-DN100
◎ Pressure: 10bar (145 PSI)
◎ Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
◎ Temperature: -20 ℃ + 150 ℃ (EPDM) -4 ℉ + 302 ℉ (+ 140 ℃ (SIP, 30) 284 ℉)
◎ Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
◎ Body Structure: straight, tee, U-tee, tank bottom valve, multi-channel diaphragm
◎ Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
◎ Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
Manual or pneumatic operation, specifically for sanitary and aseptic processes in the pharmaceutical industry. This valve is ideal for fluid control and on/off tasks. The diaphragm provides a body seal and a seat seal. There is no path to the outside environment, so the diaphragm valve is suitable for aseptic processes. When the valve is closed, the pressure pad supporting the diaphragm moves toward the sealing surface on the valve body. As the
pressure plate moves, the diaphragm bends and is forced to the seat area in the center of the valve body, thus closing the fluid path to the valve body. The relationship between the valve body and the pressure plate prevents the compression of the diaphragm. The valve can be operated manually or pneumatically, or it can be controlled by a controller and solenoid valve.
◎Specifications: 1"-4", DN25-DN100
◎ Pressure: 10bar (145 PSI)
◎Material: ASTM 316L, 1.4404, 1.4435 NB2 Fe<0.5%
◎Temperature: -20°C +150°C (EPDM)-4°F+302°F (+140°C (SIP, 30) 284°F)
◎Connection: clamp, welding, thread, 3A BPE DIN SMS IDF ISO
◎ valve body structure: straight through, three-way, U-shaped three-way, tank bottom valve, multi-channel diaphragm valve
◎ Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Vitong)
◎ Certification: 3A-54-02/1580, PED 97/23 EC, FDA177.2600
Manual or pneumatic operation, specifically for sanitary and aseptic processes in the pharmaceutical industry. This valve is ideal for fluid control and on/off tasks. The diaphragm provides a body seal and a seat seal. There is no path to the outside environment, so the diaphragm valve is suitable for aseptic processes. When the valve is closed, the pressure pad supporting the diaphragm moves toward the sealing surface on the valve body. As the pressure plate moves, the diaphragm bends and is forced to the seat area in the center of the valve body, thus closing the fluid path to the valve body. The relationship between the valve body and the pressure plate prevents the compression of the diaphragm. The valve can be operated manually or pneumatically, or it can be controlled by a controller and solenoid valve.
◎Specifications: 1"-4", DN25-DN100
◎ Pressure: 10bar (145 PSI)
◎Material: ASTM 316L, 1.4404, 1.4435 NB2 Fe<0.5%
◎Temperature: -20°C +150°C (EPDM)-4°F+302°F (+140°C (SIP, 30) 284°F)
◎Connection: clamp, welding, thread, 3A BPE DIN SMS IDF ISO
◎ valve body structure: straight through, three-way, U-shaped three-way, tank bottom valve, multi-channel diaphragm valve
◎ Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Vitong)
◎ Certification: 3A-54-02/1580, PED 97/23 EC, FDA177.2600
Twin-screw pump has self-priming ability and can transport various complex conditions such as solid particles, gas-liquid mixture, high viscosity, low viscosity and material transportation and extraction; it not only used for material extraction and Conveying, also applicable to CIP and SIP systems, it can reduce pipeline, valve control, CIP dedicated pumps, Not only improve efficiency but also reduces costs. The pump also has the performance that other volumetric pumps do not have, such as no pulse phenomenon, no damage to particles, high pressure, speed range and large flow range.
Max flow: 110m3/h
Max Particles: 23mm
Max pressure: 20 bar
Speed range: 10-3500 R.P.M
Working temperature (Max Temperature): -40 ° C to 150 ° C
Surface treatment: Ra≤0.6μm; EP=Ra0.4μm
Material: 100% stainless steel, medium contact part 316L.
Certification: 3-A-02-11 No.1759; FDA 177.2600; CE-MD/06-42 No .705201402401-00
The MINI STU-10 Rotor Pump is a miniature displacement cam rotor pump for a wide range of applications for high viscosity and low viscosity material handling. The design features of the pump are small size, low noise, wide speed range, simple maintenance and economy, all-stainless steel design includes gear box and the interior is highly clean, because all-stainless steel appearance is close to no dead angle and can be washed.
Max flow: 3000 L / h
Max pressure: 12 bar
Speed range: 10-1450 R.P.M
Working temperature (Max Temperature): -40 ° C to 150 ° C
Surface treatment: Ra≤0.6μm; EP=Ra0.4μm
Material: 100% stainless steel, medium contact part 316L
Certification: 3-A-02-11 No.1759; FDA 177.2600; CE-MD/06-42 No .705201402401-00
The manifold can be assembled by containers with various functions together. It can improve working efficiency of system and control the whole production process. The manifold can choose any flexible hose pipe and jet deviator to change the flexure automatically. The kind of automatic operation is safe, flexible and effective. One set of manifold can served to multi pipelines. Meanwhile other containers are filled in or empty, operator can clean up any one of them. The liquid won't be polluted.
Size：1.5"-DN40 to 4"-DN100
Manifold：from 4 up to 48 valves
Temperature：130℃
Pressure：10bar
Air supply：5-7bar
Control Systems
◆With a simple C-TOP on every pneumatic actuator (solenoids and sensors)
◆With a C-TOP of AS-I field bus
◆Without C-TOP, solenoids are installed in the control panel and sensors on the pneumatic actuator
◆PLC control
◆The states of the valves can be displayed on the control panel
PMZX series is a multifunctional material-liquid mixing pump with functions of mixing, shearing, emulsifying, homogenizing, differentiating, refining, crushing and material quality improvement. Compare with traditional production process, this pump is simpler, more convenient and economical, it can improve the production efficiency & improves the quality of the materials to be treated. Mainly used in food, beverages, dairy products, additives, personal care, biopharmaceuticals, thickeners, industrial applications.
The maximum processing capacity of powder: 9000KG/h
Maximum processing of thickeners: 3000KG/h (depending on material viscosity and concentration)
Maximum temperature: 130 ° C
Material: 304 /316L, 1.4301/1.4404, ASME BPE 316L, 1.4435 BN2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single machine seal and double machine seal
Inlet/outlet connections: Thread, clamp, flange, sterile flange
Certification: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;
●Manual tank bottom valve is a pneumatically operated single seat valve which is assembled at the bottom of tank,used in diary,food processing, beverage,pharmaceutical and fine chemical industries.
●Tank bottom valve is used to vent the container material and the material will not be stuck in the valve chamber, the design of the seat open to the inside of the container. It avoids the over voltage because the pipe leads to the possibility of accidental opening of the valve. The tank bottom valve has 45 ° and 90 ° two designs, pneumatic and manual interchangeable.
●Size：DN25/1" to DN100/4"
●Temperature ：130℃
●Pressure：10bar
●Air supply：4-7bar
●Material：ASTM 304/1.4301，316L/1.4404
●Gaskets：EPDM、FPM、HNBR，FDA177.2600
●Treatment：Ra<0.8μm
●Certificate：3-A-53-06，PED/97/23/EC,FDA177.2600
The vent valve is a reliable automatic venting valve that removes air as needed and is mounted vertically on top of the pipe or vessel.
The following is an example of the use of an exhaust valve:
Shown 1: Due to material or process requirements, the canisters form cavitation and therefore require air to be
vented. In this case, the valve is mounted on the top of the container.
●Specifications: 1"-12", DN25-DN200
●Material: ASTM 304/1.4301, 316L1.4404
● Washer: EPDM FPM
● Pressure: 10bar
● Temperature: -10 ° C to 130 ° C
DJ-FDT butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal opening and closing does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body, and adjustable pressure. The valve does not require professional tools to be disassembled, maintained,
cleaned, safe, reliable, low cost, simple to operate, and can be interchanged manually, pneumatically, or electrically.
Specifications: 4''-10'', DN100-DN250
Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILCON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matt (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.
The DJ-D71BV is a clip-on centerline butterfly valve. The valve body consists of a ring-shaped seat, an elastic lining and a disc. The disc is rotated 90° through the valve shaft into the washer to control the fluid. Depending on the model and size, working pressures up to 25 bar and media temperatures up to 210 °C are possible. In most cases, these valves are used to control pure liquids, but can also be used for other media such as gases through special selection. Due to the wide variety of materials, butterfly valves are widely used in industries such as chemical and water treatment. Butterfly valves are also a very economical fluid solution in some process segments where the frequency of opening and closing, hygienic level and control accuracy are not critical. Butterfly valves are usually the only alternative for pipeline applications larger than DN 150. In the case of higher requirements for corrosion resistance or sanitary grade, a lined butterfly valve can be used. PFA-encapsulated discs for highly aggressive media in the chemical or semiconductor industry; polished stainless steel discs for use in the food or pharmaceutical industry.
Specifications SIZE: 1.5"-12", DN40-DN300
Material: valve body CF8 (304); valve plate CF3M (316L), CF8 (304), stainless steel + PFA
Pressure: PN10; PN16
Temperature: EPDM -20 ° C to +130 ° C, other materials refer to the following data table
Seal: EPDM SILICON FKM HNBR NBR PTFE TFM
Connection method: clip type, lug type
Drive mode: manual, pneumatic, electric
The DJ-D71BV is a clip-on centerline butterfly valve. The valve body consists of a ring-shaped seat, an elastic lining and a disc. The disc is rotated 90° through the valve shaft into the washer to control the fluid. Depending on the model and size, working pressures up to 25 bar and media temperatures up to 210 °C are possible. In most cases, these valves are used to control pure liquids, but can also be used for other media such as gases through special selection. Due to the wide variety of materials, butterfly valves are widely used in industries such as chemical and water treatment. Butterfly valves are also a very economical fluid solution in some process segments where the frequency of opening and closing, hygienic level and control accuracy are not critical. Butterfly valves are usually the only alternative for pipeline applications larger than DN 150. In the case of higher requirements for corrosion resistance or sanitary grade, a lined butterfly valve can be used. PFA-encapsulated discs for highly aggressive media in the chemical or semiconductor industry; polished stainless steel discs for use in the food or pharmaceutical industry.
Specifications: 1.5"-12", DN40-DN300
Material: valve body CF8 (304); valve plate CF3M (316L), CF8 (304), stainless steel + PFA
Pressure: PN10; PN16
Temperature: EPDM -20 ° C to +130 ° C, other materials refer to the following data table
Seal: EPDM SILICON FKM HNBR NBR PTFE TFM
Connection method: clip type, lug type
Drive mode: manual, pneumatic, electric
DJ-FDT butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal opening and closing does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body, and adjustable pressure. The valve does not require professional tools to be disassembled, maintained, cleaned, safe, reliable, low cost, simple to operate, and can be interchanged manually, pneumatically, or electrically.
Specifications: 4''-10'', DN100-DN250
Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILCON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matt (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.
DJ-FDT butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal opening and closing does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body, and adjustable pressure. The valve does not require professional tools to be disassembled, maintained,
cleaned, safe, reliable, low cost, simple to operate, and can be interchanged manually, pneumatically, or electrically.
Specifications: 4''-10'', DN100-DN250
Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
Material: 316L/1.4404/1.4435
Seal: White SILCON (recommended) Gray FKM (selection)
Execution mode: manual, pneumatic, electric interchangeable
Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
External surface: matt (recommended) bright blasting electropolishing
Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.
Proportional pneumatic cut-off regulating valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures, and so on.
Proportional pneumatic adjustment butterfly valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures and so on.
Input signal: 0/4-20mA
Bus communication: MODE BUS RS485
Input signal: 0/4-20mA, 0-5/10V (optional)
Output signal: 0/4-20mA, 0-5/10V (optional)
Display: OLED Chinese menu
Material: 304/1.4301, 316L/1.4404, 1.4435, 2205
Specification: 1/2"-12", DN10-DN300
Temperature: -20 ° C to 150 ° C
Pressure: vacuum -10bar
Air source pressure: 4-7bar
Power supply: DC 24V ±10%
Health certification: 3-A-53-06; PED-97/23/EC; FDA177.2600
Explosion-proof certification: II 2 G Ex ib IIC T6/T5/T4
Proportional pneumatic adjustment ball valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures and so on
Input signal: 0/4-20mA
Bus communication: MODE BUS RS485
Input signal: 0/4-20mA, 0-5/10V (optional)
Output signal: 0/4-20mA, 0-5/10V (optional)
Display: OLED Chinese menu
Material: 304/1.4301, 316L/1.4404, 1.4435, 2205
Specification: 1/2"-6", DN10-DN150
Temperature: -20 ° C to 150 ° C
Pressure: vacuum -10bar
Air source pressure: 4-7bar
Power supply: DC 24V ±10%
Health certification: 3-A-53-06; PED-97/23/EC; FDA177.2600
Explosion-proof certification: II 2 G Ex ib IIC T6/T5/T4
Diaphragm type Pneumatic control valve is used in dairy, food, beverage production, bio-pharmaceutical, fine chemical, water treatment, new energy and other industries. The valve controls various fluid flows, temperatures, pressures and so on
Manual pneumatic integrated, membrane pneumatic proportional control valve, which can be applied to various flow control and adjustment systems, and can be applied in various industrial fields such as chemical, sewage treatment, dairy, food, beverage production, pharmaceutical and fine. Industrial fields such as chemical industry. The most important applications are pressure control, flow control, liquid level, temperature control, etc.
Control input: 0/4-20mA/0-5V/10V
Feedback output : 0/4-20mA/0-5V/10V
Power supply : DC24V ± 10%
Bus communication: MODE BUS RS485
Accuracy: Repeat positioning accuracy ≤ 0.2%;
Menu: OLED display Chinese & English
Setting: One-button auto-tuning function
Operating mode: manual / automatic
Fault: gas cut, power off, automatic valve position reset (standard) valve position hold function (optional)
Stroke angle: 0-180°
◆The valve position is not consuming when it is kept
◆Power supply: DC24V ±10%
●Scope of application: straight stroke and angular travel 30°-180°
●Aluminum alloy casing
●Explosion-proof grade ExdIIBT4 (optional)
●IP68 protection level
ITS-100 is a rotary angular stroke pneumatic valve position feedback device designed primarily for valve process position feedback. It is compatible with most PLC (Programmable Logic Controller) automation systems and used to control all types of process valves. . It can be mounted on a variety of pneumatic valves, such as pneumatic butterfly valves, ball valves, globe valves and other rotary stroke valves.....
Passive signal
Feedback output: 2 passive signals
Open: Green
Close: red
Stroke angle: 0-180°
Active signal
Feedback Output : PNP DC 24V
Open: Green
Close: red
Stroke angle: 0-180°
DJ-CIP-L series self-priming pump not only optimizes the internal structure, impeller design, dead angle treatment, machine seal pressure balance design and the machine seal is completely in the flushing area， but?also optimized the external hygiene of the pump to make it more hygienic and reduce the dead angle inside. Because there is no dead zone, it is very easy to be cleaned by CIP, SIP sterilization and so on. In addition, we have maintained the most flexible combination of DJ-CIP series pumps. For example, the pump outlet angle can be adjusted from 0° to 135°, It?keeps the pump maintenance and maintenance and machine seal replacement efficient. The requirement for a high degree of professionalism is reduced, and these do not require special tools. Therefore, the goal of achieving high efficiency, hygiene, high reliability and low cost is to make the DJ-CIP series pump into?high performance self-priming pump.
Maximum flow rate Max Flow rate: 40m3/h
Maximum head Max Head: 42 H/M
Maximum suction Max suction: 8 / M
Temperature: -20 ° C to 130 ° C Temperature: -20 ° C to 130 ° C
Power power :1.5-15KW
Material Material: 304 /316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe≤0.5%
Surface treatment: ≤ Ra0.8μm, ≤ Ra0.6μm, ≤ Ra0.4μm
Machine seal: single machine seal, double machine seal
Inlet/Outlet Connection: Thread, Clamp, Flange, Aseptic Flange
Certification: 3-A-02-10 (N.O.1579); MD/06/42-EC (N.O.70521616101-00); FDA 177.2600; USP CLASS-II; EG/VO1935/2004;
| File | Description | Language | Size |
|---|
Get A Free Quote
