Pipeline Filter

Duplex filter

The duplex filters applies to purify solids that cannot be seen with the naked eye, such as milk, sugar, soft drinks and other liquid in the barrel. Two filters are used interchangeably, Don't need stop it to replace or wash the filter. It is suitable for continuous production.
Filter body material:AISI 316L、AISI 304
Gasket:EPDM FDA 177.2600
Inner surface treatment:Ra<0.4μm
Hole Dia:0.5mm to 2.0mm
Mesh size:30Grits to 300Grits
Size:DN 25-DN150/1"-6"
Working temperature:-10℃-120℃(EPDM)
Max. working pressure:10bar 145PSI

Angle filter

Filter are widely used in the auxiliary service for food processing, cosmetic, chemicals and pharmacy industries. With high hygienic design,it is mainly used to filter the particulates which will damage pumps and some other equipment .The filter is basiclly consist of inlet outlet and filter body. Filter mesh is installed inside to remain all particles equal or greater than mesh

Size:DN25-DN150 1"-6"
Working temperature:-10℃-120℃(EPDM)
Max. working pressure:10bar 145PSI
Gasket:Silicon MVQ FPM
Connection: clamp,thread, weld
Standard:DIN,SMS,RJT,IDF,3A
Hole Dia:0.5mm to 2.0mm
Mesh size: 30 Grits to 300 Grits

Y type filter

Filter are widely used in the auxiliary service for food processing, cosmetic, chemicals and pharmacy industries. With high hygienic design,it is mainly used to filter the particulates which will damage pumps and some other equipment. The filter is basiclly consist of inlet outlet and filter body. Filter mesh is installed inside to remain all particles equal or greater than mesh
Size:DN25-DN150 1"-6"
Working temperature:-10℃-120℃(EPDM)
Max. working pressure:10bar 145PSI
Gasket:Silicon MVQ FPM
Connection: clamp,thread, weld
Standard:DIN,SMS,RJT,IDF,3A
Hole Dia:0.5mm to 2.0mm
Mesh size: 30 Grits to 300 Grits

Straight filter

Filter are widely used in the auxiliary service for food processing, cosmetic, chemicals and pharmacy industries. With high hygienic design,it is mainly used to filter the particulates which will damage pumps and some other equipment.The filter is basiclly consist of inlet outlet and filter body. Filter mesh is installed inside to remain all particles equal or greater than mesh

Size:DN25-DN150 1"-6"
Working temperature:-10℃-120℃(EPDM)
Max. working pressure:10bar 145PSI
Gasket:Silicon MVQ FPM
Connection: clamp,thread, weld
Standard:DIN,SMS,RJT,IDF,3A
Hole Dia:0.5mm to 2.0mm
Mesh size: 30 Grits to 300 Grits

Get A Free Quote

Get A Free Quote
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All