Pump head discharge H The pump head refers to the energy obtained by a unit weight of liquid after passing through the pump. It is expressed as H, and the unit is m, that is, the height of the liquid
Pump outlet pressure Pump outlet pressure refers to the total pressure energy (unit: MPa) of the delivered liquid after passing through the pump. It is an important indicator of whether the pump can
Film-type single seat valves are widely used in many industrial fields, as shown below, but not including other uses. Petroleum industry: In the process of oil extraction and refining, Film-type sing
Ⅰ.Flow requirements Determine the flow range: first of all, it is necessary to specify the liquid flow rate that needs to be transported per hour or per minute, usually in cubic metres per hour or cu...
In the field of industrial automation and process control, pneumatic control valves play a vital role in regulating the flow of fluids, gases and even solids in various systems. These valves utilize c
Valve control technology is ubiquitous in modern industry, from oil and gas to water treatment and chemical production, valve controls ensure the efficient and safe operation of fluid systems. So, are
Valves play a vital role in engineering by controlling flow, pressure and direction of flow in fluid systems. Whether in industrial production, municipal water supplies, chemical processes or building
The most significant advantage is that it can be cleaned and sterilized by the online original CIP. This technical characteristics can completely clean and disinfect the valve without disassembly. Thi...
IO-LINK is a worldwide standardised IO technology (IEC 61131-9) for communicating with sensors and actuators. IO-LINK is a point-to-point communication system with 3-condtctor or 5-conductor connectio...
Cotroller / control unit / C-TOP, including signal transmission and LED position indicating light, is used for controlling process valve of all kinds. Information collection is come from PLC or other ...
Donjoy new pump, double head twin screw pump has been went into production.
Q: How to select suitable lobe pump?A: Firstly, you should know the viscosity of the medium that the lobe pump will be used for and required flow rate & head/pressure.
