Food

Straight sampling valve

◆Straight sampling valve open inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
◎Operating principle:when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the,hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
◎Temperature:-10℃ -130℃
◎Body material: AISI 304 AISI 316L
◎Seal material: PTFE
◎Connection: clamp, thread, weld, Nut

Aseptic Diaphragm Sampling Valve

Mini type diaphragm sampling valve manual / pneumatic operation, T type, L-type 3 way, U-type 3 way, straight type etc. These valves are mainly used in the solid-liquid sampling on biological systems, laboratories and other projects.
Design Features
●Size: 1/4 "-3/4",DN6-DN15
●Diaphragm PTFE+EPDM/Silicong/EPDM/FPM
●Max temperature: 150℃, ok for CIP/SIP
●Max pressure: 10bar
●Standards: BPE 3A DIN ISO IDF
●Material:316L,1.4404
●Max temperature: - 30 to 150 ℃ (depending on seal material) (stainless steel actuator)
●Max temperature: - 30 to 130 ℃ (depending on seal material) (plastic actuator)
●Max pressure: one way (DELTA P = 100%)
Normally close EPDM 8 bar, PTFE 6 bar (option)
Normally close EPDM 6 bar, PTFE 4.5 bar (standard)
Normally open and double action EPDM 8 bar, PTFE 6 bar
●Certificate: PED/97/23/EC,3A/54-04/1580,FDA.177.2600

Automatic Reset Aseptic Sampling Valve

◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam.
◆Connection: clamp, welding, tank connector, multi-channel pipeline connector
◆Valve body material:AISI 316L(1.4404)ASME BPE 316L
◆Diaphragm:EPDM PTFE
◆Max. Temperature:130℃(EPDM)
◆Max. Temperature:150℃(PTFE)
◆Pressure: 10bar
◆Certificate:3-A-55-02,PED/97/23/EC

Pneumatic Aseptic Sampling Valve

◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam
◆Application: The aseptic sampling valve is applied to beer, milk, beverage, fruit juice, pharmacy industries etc.
◆Connection: Welding, Clamp.
◆Valve body material:AISI 316L(1.4404)ASME BPE 316L
◆membrane:EPDM PTFE
◆Max. Temperature:130℃(EPDM)
◆Max. Temperature:150℃(PTFE)
◆Pressure:10bar
◆Certificate:3-A-55-02,PED/97/23/EC

Manual Aseptic Sampling Valve

◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam.
◆Appplication: The aseptic sampling valve is applied to beer, milk, beverage, fruit juice, pharmacy industries etc.
◆Connection: clamp, welding
◆Valve body material:AISI 316L(1.4404)ASME BPE 316L
◆Membrane:EPDM PTFE
◆Max. Temperature:130℃(EPDM)
◆Max. Temperature:150℃(PTFE)
◆Pressure:10bar
◆Certificate:3-A-55-02,PED/97/23/EC

Check Valve

◎Specifications:DN8-DN50,1/2"-2"
◎Material:CF8/304,CF8M/316
◎Nominal pressure:PN1.6,2.5,4.0,6.4MPa
◎Strength test pressure:PN2.4,3.8,6.0,9.6MPa
◎High pressure seal pressure test:1.8,2.8,4.4,7.1MPa
◎Applicable medium:H1 H-(16-64)C Water, oil, gas
◎Applicable temperature:-40~180℃

Flange check valve

◎Check valve is designed to prevent fluid from flowing back and ensure the flow to one way direction.
◎It can be used to reduce the loss of fluid back suction,avoid pipe is shock by liquid
◎It is used in the food-processing, beverages, winery, oil, cosmetics,pharmaceuticals and chemicals industries.
◎The valve is open when pressure of the fluid exceeds the spring pressure and it is closed when the two pressures are close equal.And stronger counter-pressure also makes the valve closed.

◎Specifications: DN-50/2" TO DN-300/12"
◎Boby/shaft: AISI 316L/304
◎Spring: AISI 304
◎Seal: EPDM according to FDA177.2600
◎Surface Treatment: Ra ≤0.8 μm
◎Seal: NBR, FPM (Viton) or PTFE. FDA 177.2600(optional)
◎Connections: weld, thread, clamp, DIN, SMS, RJT, IDF, ISO,3A
◎Max. pressure:10 bar
◎Opening pressure:0.3bar(DN-25)0.2bar(DN-32/40)0.1bar(DN-50/100)
◎Working temperature : -10℃ to 130℃(EPDM)

Check valve with clamp end

◎Check valve is designed to prevent fluid from flowing back and ensure the flow to one way direction.
◎It can be used to reduce the loss of fluid back suction,avoid pipe is shock by liquid
◎It is used in the food-processing, beverages, winery, oil, cosmetics,pharmaceuticals and chemicals industries.
◎The valve is open when pressure of the fluid exceeds the spring pressure and it is closed when the two
pressures are close equal.And stronger counter-pressure also makes the valve closed.

◎Specifications: DN-25/1" TO DN-100/4"
◎Boby/shaft: AISI 316L/304
◎Spring: AISI 304
◎Seal: EPDM according to FDA177.2600
◎Surface Treatment: Ra ≤0.8 μm
◎Seal:NBR, FPM (Viton) or PTFE. FDA 177.2600(optional)
◎Connections: weld, thread, clamp, DIN, SMS, RJT, IDF, ISO,3A
◎Max. pressure:10 bar
◎Opening pressure:0.3bar(DN-25)0.2bar(DN-32/40)0.1bar(DN-50/100)
◎Working temperature : -10℃ to 130℃(EPDM)

Check valve clamp ends

◎Check valve is designed to prevent fluid from flowing back and ensure the flow to one way direction.
◎It can be used to reduce the loss of fluid back suction,avoid pipe is shock by liquid
◎It is used in the food-processing, beverages, winery, oil, cosmetics,pharmaceuticals and chemicals industries.
◎The valve is open when pressure of the fluid exceeds the spring pressure and it is closed when the two pressures are close equal.And stronger counter-pressure also makes the valve closed.
◎Specifications: DN-25/1" TO DN-100/4"
◎Boby/shaft: AISI 316L/304
◎Spring: AISI 304
◎Seal: EPDM according to FDA177.2600
◎Surface Treatment: Ra ≤0.8 μm
◎Seal: NBR, FPM (Viton) or PTFE. FDA 177.2600(optional)
◎Connections: weld, thread, clamp, DIN, SMS, RJT, IDF, ISO,3A
◎Max. pressure:10 bar
◎Opening pressure:0.3bar(DN-25) 0.2bar(DN-32/40) 0.1bar(DN-50/100)
◎Working temperature : -10℃ to 130℃(EPDM)

Nut check valve

◎Check valve is designed to prevent fluid from flowing back and ensure the flow to one way direction.
◎It can be used to reduce the loss of fluid back suction,avoid pipe is shock by liquid
◎It is used in the food-processing, beverages, winery, oil, cosmetics,pharmaceuticals and chemicals industries.
◎The valve opens when pressure of the fluid exceeds the spring pressure.It is closed when the two pressures are close equal.And stronger counter-pressure also makes the valve closed.

◎Specifications: DN-25/1" TO DN-100/4"
◎Boby/shaft: AISI 316L/304
◎Spring: AISI 304
◎Seal: EPDM according to FDA177.2600
◎Surface Treatment: Ra ≤0.8 μm
◎Seal:NBR, FPM (Viton) or PTFE. FDA 177.2600(optional)
◎Connections: weld, thread, clamp, DIN, SMS, RJT, IDF, ISO,3A
◎Max. pressure:10 bar
◎Opening pressure:0.3bar(DN-25)0.2bar(DN-32/40)0.1bar(DN-50/100)
◎Working temperature : -10℃ to 130℃(EPDM)

Third generation high purity check valve

In 2015, DONJOY carried out a comprehensive technical update of the check valve. After the upgrade, the check valve has a smaller dead angle, smaller flow resistance, and the valve core is sealed with full PTFE. Satisfied with automatic welding, the technology meets ASME BPE, 3-A-6800, EHEDG high clean technical requirements.
◎Check valve is designed to prevent fluid from flowing back and ensure the flow to one way direction.
◎It can be used to reduce the loss of fluid back suction,avoid pipe is shock by liquid
◎It is used in the food-processing, beverages, winery, oil, cosmetics,pharmaceuticals and chemicals industries.
◆SIZE: 1/2"-8", DN10-DN200
◆Material: 304/316L
◆ Pressure: 10bar
◆Opening pressure: 0.02bar
◆Negative pressure: -0.9bar
◆Temperature: -30 ° C to 130 ° C (150 ° C optional)
◆ valve body structure: nut type, clamp, flange
◆Interface: various special interfaces such as welding, clamp, thread, flange, etc.

Pneumatic angle seat valve with control unit

Pneumatic angle seat valve with control unit is a general switch in the automatic control system widely used in printing, dyeing, bleaching, food,washing,chemical, water treatment, pharmacy and other automatic machinery and equipment. It is featured with water hammer protection,noise-free, reliable sealing performance.

Size:1/2"-3",DN10-DN80
Material:CF8、CF8M
Connection : Clamp, weld, thread,BSP/BSTP/NPT,DIN,Inch
Control unit
Position feedback, Can be viewed on (Green) off (Red)
Built-in Solenoid valve
Valve opens– green light
Valve closes-red light
The design has inching button (manual design)
Power Supply:DC 24V ±10%
Air supply:M5/Φ4

Pneumatic angle seat valves with Positioner

Pneumatic angle seat valves with Positioner is mainly used in the flow control valve adjustment. The medium contacting with the valve and the position is only stainless steel and PTFE. Maximum temperature can reach to 180 ℃, pressure up to 20bar. It can also be used in vacuum environment. According to the design of valve body without dead angle, surface roughness up to Ra0.4 μ m,valve seal with embedded designs, it is used very broadly covering almost all sectors, such as pharmaceuticals, food andbeverage, brewery, chemical and other industries. The valve is particularly suitable for steam flow regulating control system.

◆Size: 1/2"-3", DN10-DN80
◆Material: CF8/304、CF8M/316
◆Connection : Clamp,thread,flange,BSP,BSP,NPT,DIN
◆Working pressure:8bar(standard) 10bar(Options)
◆Working temperature:120℃(standard) 180℃(Options)
●0/4...20mA to 0...5/10V(standard)
●0/4...20mA Position feedback output (Options)
●Device NET Device Net bus control (Options)
●Support single self-tuning function
●Protection grade IP67
●Power Supply DC 24V ±10%
●Support manual and automatic operation

Pneumatic angle seat valve

Pneumatic angle seat valve is a general switch in the automatic control system which is widely used in printing, dyeing, bleaching, food,washing,chemical, water treatment, pharmacy and other automatic machinery and equipment. It is featured with water hammer protection,noise-free, reliable sealing performance.
Design Features
● Size: 1/2"-2 1/2", DN10-DN65
● Material: CF8/304、CF8M/316
● Connection : Clamp,thread,flange,BSP、BSP、NPT,、DIN
● Pneumatically operated:
1)Can be configured to position sensor
2)valve locator (process controller)
3)Valve position Regulator
4)MINI C-TOP Control unit
●Manual pneumatic interchangeable
●Working pressure:8bar(standard) 10bar(option)
●Working temperature:120℃(standard) 180℃(option)

Manual angle seat valves

Application
Angle seat valve is a general switch in the automatic control system which is widely used in printing, dyeing, bleaching, food,washing,chemical, water treatment, pharmacy and other automatic machinery and equipment. It is featured with water hammer protection,noise-free, reliable sealing performance.

Design Features
● Size: 1/2"-2 1/2", DN10-DN65
● Material: CF8/304、CF8M/316
● Connection : Clamp,thread,flange,BSP、BSP、NPT,、DIN
● Pneumatically operated:
1)Can be configured to position sensor
2)valve locator (process controller)
3)Valve position Regulator
4)MINI C-TOP Control unit
●Manual pneumatic interchangeable
●Working pressure:8bar(standard) 10bar(option)
●Working temperature:120℃(standard) 180℃(option)

Globe Valve

◎ Specifications: DN8-DN50,1 / 2 & quot; -2 & quot;
◎ Nominal pressure: PN1 .6,2.5,4.0,6.4MPa
◎ strength test pressure: PT2.4,3.8,6.0,9.6MPa
◎ High pressure seal pressure test: 1.8,2.8,4.4,7.1MPa
◎ Applicable medium: J11W- (16-64) C water, oil, gas, J11W- (16-64) P nitric acid, J11W- (16-64) R acetic acid
◎ Applicable temperature: -40 ~ 180 ℃
◎ Material: CF8, CF8M

Flanged Globe Valve

◎Specifications:DN15-DN200,1/2"-8"
◎Nominal pressure:PN1.6-6.4, Class 150/300,10k/20k
◎Strength test pressure:PT1.5PN
◎High pressure seal pressure test:1.1PN
◎Applicable medium:J41H-(16-64)C water, oil, gas J41W-(16-64)P nitric acid J41W-(16-64)R acetic acid
◎Applicable temperature:-40~180℃
◎Material:CF8、CF8M

Manual Globe Valve

Manual globe valve as pipeline switch in technology system is widely used in printing and weaving, printing and dyeing, bleaching, washing, food, chemical industry, water treatment, pharmaceutical, ect. It is featured with water hammer protection,noise-free, reliable sealing performance.

◆Size: 1/2"-3", DN10-DN80
◆Material: CF8/304、CF8M/316
◆Connection : Clamp,thread,flange,BSP、BSP、NPT、DIN
◆Working pressure:8bar(standard) 10bar(Options)
◆Working temperature:130℃(standard) 180℃(Options)

Regulating Globe valve

Regulating Globe valve is mainly used in the flow control valve. The valves only has stainless steel and PTFE in contact with media with maximum temperature up to 180 ℃, pressure up to 20bar, can be used in a vacuum environment. Body is designed according to no dead angle with the surface roughness up to Ra0.4μm. Valve seal adopts embedded design which is widely used in all industries, such as pharmaceutical, food and beverage, brewing, chemical and other industries . This valve is particularly suitable for steam flow regulating control systems.
● Pneumatic regulating valve, controlled by positioner to achieve flow control (PD) may also adopt self position and flow adjustment (PID) by intelligent process controller.
● Size: 1 "-4", DN25-DN100
● Material: 304 / 1.4301,316L / 1.4404
● Maximum temperature: -30 to 150 ℃
● Maximum pressure: vacuum to 10bar

Pneumatic Globe Valve  with control unit

Pneumatic Globe Valve with control unit as an automatic control system of line switch is widely used in printing and weaving, printing and dyeing, bleaching, washing, food, chemical industry, water treatment, pharmaceutical, ect. It has the characteristics of anti water hammer, no noise, reliable sealing performance etc..

◆Size: 1/2"-3", DN10-DN80
◆Material: CF8/304、CF8M/316
◆Connection : Clamp, thread, flange,BSP、BSP、NPT、DIN
◆Working pressure:8bar(standard) 10bar(Options)
◆Working temperature:120℃(standard) 180℃(Options)
◆Manual:1) plastic handwheel; 2) stainless steel handwheel; 3) fine-tuning the handwheel
◆Pneumatic:1) plastic actuator (standard) 2) stainless steel actuators (option)
◆Pneumatic control mode: positioner, process controller, valve control unit, position sensor

Pneumatic Globe Valve

Pneumatic Globe Valve as an automatic control system of line switch is widely used in printing and weaving, printing and dyeing, bleaching, washing, food, chemical industry, water treatment, pharmaceutical, ect. It has the characteristics of anti water hammer, no noise, reliable sealing performance etc..

◆Size: 1/2"-3", DN10-DN80
◆Material: CF8/304、CF8M/316
◆Connection : Clamp,thread, flange,BSP、BSP、NPT、DIN
◆Working pressure:8bar(standard) 10bar(Options)
◆Working temperature:120℃(standard) 180℃(Options)
◆Manual:1) plastic handwheel; 2) stainless steel handwheel; 3) fine-tuning the handwheel
◆Pneumatic:1) plastic actuator (standard) 2) stainless steel actuators (option)
◆Pneumatic control mode: positioner, process controller, valve control unit, position sensor

Horizontal pneumatic three way non retention ball valve

Horizontal pneumatic three way non retention ball valve, the hygienic design of the valve is widely used in the field of food processing, beverages, fruit juices, wine, biopharmaceutical with vary flexible body combinations, for example, L-Port or T-Port which can be interchangeable on-site Inlet and outlet to be any combination of changes for guaranting zero dead angle and no retention.

Technical specifications
Size:1"-4",DN25-DN100
Material:1.4301/304,316L/1.4404
Gaskets:PTFE,TFM(FDA 177.1550)
Max. temperature:-20℃ - 150℃(Standard)-30℃ - 200℃(Option)
Pressure:10-30bar(Depending on seal material and temperature)
Operating modes:manual, pneumatic, electric
Surface finishing:Internal surface Ra0.6μm, external surface sand blast
Certificate:3-A-68-00,PED/97/23/EC
Configuration Controls:process controller/valve positioning ,0/4....20mA,0 5/10V(see controller directory)(Option)
Top of the valve control unit,AS-1 Device Net bus communication terminal connection(Option)
position sensor PNP NPN(Option)

Three way non-retention ball valve

Three way non-retention ball valve, the hygienic design of the valve is widely used in the field of food processing, beverages, fruit juices, wine, biopharmaceutical with vary flexible body combinations, for example, L-Port or T-Port which can be interchangeable on-site Inlet and outlet to be any combination of changes for guaranting zero dead angle and no retention.

Technical specifications
Size:1"-4",DN25-DN100
Material:1.4301/304,316L/1.4404
Gasket:PTFE,TFM(FDA 177.1550)
Max. temperature:-20℃ - 150℃(Standard)-30℃ - 200℃(Option)
Pressure:10-30bar(Depending on seal material and temperature)
Operating modes:manual, pneumatic, electric
Surface finishing:Internal surface Ra0.6μm, external surface sand blast
Certificate:3-A-68-00,PED/97/23/EC
Configuration Controls:process controller/valve positioning ,0/4....20mA,0 5/10V(see controller directory)(Option)
Top of the valve control unit,AS-1 Device Net bus communication terminal connection(Option)
position sensor PNP NPN(Option)

Pneumatic three way non-retention ball valve

Pneumatic three way non-retention ball valve, the hygienic design of the valve is widely used in the field of food processing, beverages, fruit juices, wine, biopharmaceutical with vary flexible body combinations, for example, L-Port or T-Port which can be interchangeable on-site Inlet and outlet to be any combination of changes for guaranting zero dead angle and no retention.

Technical specifications
Size:1"-4",DN25-DN100
Material:1.4301/304,316L/1.4404
Gaskets:PTFE,TFM(FDA 177.1550)
Max. temperature:-20℃ - 150℃(Standard)-30℃ - 200℃(Option)
Pressure:10-30bar(Depending on seal material and temperature)
Operating modes:manual, pneumatic, electric
Surface finishing:Internal surface Ra0.6μm, external surface sand blast
Certificate:3-A-68-00,PED/97/23/EC

Get A Free Quote

Get A Free Quote
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All