◆Rotary cleaning ball series products are mainly used to spray strongly and clean inside of tank in food-processing, beverage, beer, pharmaceutical industries.
◆Rotary cleaning ball：Spherical is oval and round,the injector jet is flat groove type
Cleaning Radius：Maximum 4 m（4bar）
Cleaning angle：180°；360°
Sphere options: 1) round ball; 2) oval ball
Size：28mm / 75mm
Material：316L
Connections：female thread/male thread(1/2"-2"BSP/BSPT),clamp(1"-2"),Bolt(1"-2"),weld(1“-2")
Applications
◆Rotary injector is sanitary water cleaner tank with 360 °coverage in a given tank or process container. The injector is flowing liquid through impeller generates kinetic energy
◆Rotary injector with unique self cleaning function, internal is completely cleaning.
Technical specifications
◆Cleaning Radius：Diameter14M
◆Flow：4-45m3
◆Inlet pressure：4-10bar
◆Suggest pressure：6bar
◆Max temperature：95℃
◆Connections：thread BSP, 1.5"-DN40/1"DN25
◆ClampsDIN/INCH, 1.5"-DN40
◆Material：316L/1.4404，PTFE
◆Lubrication: cleaning medium
The cleaning valve, mainly solve the dead space formed by the cleaning ball for a long time in the medium, thereby contaminating the medium due to bacterial reproduction. When the valve is open,it is cleaning,when it is closed, keeping the cleaning ball and medium does not contac, so as to avoid the dead angle.
●Cleaning Radius：3M
●Size：DN25/1"到DN100/4"
●Temperature：130℃
●Pressure：10bar
●Air supply：4-7bar
●Material：ASTM 304/1.4301，316L/1.4404
●Seal：EPDM、FPM、HNBR，FDA177.2600
●Inner surface treatment：Ra<0.8μm
●Surface treatment: sand blasting, polishing
●Configuration options: position sensor, control unit
●Certificate：3-A-53-06，PED/97/23/EC,FDA177.2600
Application
Exhaust valve is a reliable automatic exhaust valve, on-demand to clear the air, mounted vertically on top of the pipe or vessel, or at the inlet of the pump at the installation.
Here below are two examples of aplications.
Example 1:Air cavity is formed due to the installation of the pipeline, and thus need to release air. In this case the valve is installed at the top of the pipe.
Example 2:Discharge air at inside of the pipeline of the pump. When the pump opened the air will be automatically discharged and forming a vacuum. In order to avoid the air mixed with products . In this case the valve is installed in front of the pump, on top of the inlet pipe.
Working Principle
Air Release valve is a double-seat valve with a freely movable plastic ball. The ball, which is lighter than water, According the conditions of pressure to close the upper or lower valve seat.
●Size: 1"-1.5", DN25-DN40
●Connection mode : Clamps, welding, thread,DIN、SMS、IDF、ISO
●aterial: ASTM 304/1.4301, 316L1.4404
●Seal ring: EPDM FPM
●pressure: 10bar
●temperature: -10℃-130℃
Application
This valve used in pressure vessel or pipe system with multiple functions, negative pressure (vacuum) and adjustable pressure setting:
◆ 1）when pressure is higher than the set pressure (standard 1 bar)release air, Otherwise is closed;(pressure regulator can be set)
◆ 2）when the pipe system in vacuum (standard - 0.9 bar) valve open automatically . It ensure the equipment and related instrument security, at the same time it can meet various production process demand. This valve made as full stainless steel materials, hygienic design,
◆Size: 1"-2", DN25-DN50
◆Connection: Clamp, welding, thread, DIN、SMS、IDF、ISO
◆Material: ASTM 304/1.4301, 316L1.4404
◆Gasket: EPDM FPM
◆Pressure: 0.5......2bar
◆Vacuum: 0.3......0.9bar
◆Temperature: -10℃-130℃
Mini type safety valve for the specific volume is small, exquisite appearance, with a lock nut, especially suitable for micro pressure vessel equipment protection. No retention seal design
◎The valve is normally closed.
◎By adjusting the spring with pressure nut, the valve is calibrated to a specific pressure
◎When the pressure in the pipe exceeds to the specify pressure, In order to reduce pressure the valve open automatically to make the liquid out
◆Size：1/2"-3/4",DN10-DN20
◆KV value：0.9-1.1m3/h
◆Max. Temperature：130℃(EPDM)/266℉
◆Set-pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special
◎Sight glass Type Drain Valve is used to protect the flow through pipes, pumps, accessories, especially irrigation safety equipment.
◎Sight glass Type Drain Valve design of health and safety, prevent dangerous and equipment failure due to the pressure induced, exterior design with a transparent window can be observed in the overflow, pressure setting can be achieved through the upper hand wheel ,it can debug through external pressure gauge which can be clearly see
◎Full stainless steel, the valve is the best choice for protection equipment in diary,food, beverage, pharmacy and fine chemical industries.
◆Size：1"-2",DN25-DN50
◆KV Value：8.5-49m3/h
◆Max. temperature：130℃(EPDM)/266℉
◆set-pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special
◎The safety valve is used to protect the flow pressure safety through pipes, pumps, accessories, pools, etc.
◎With sanitary and safe design, it's avoid operation danger and equipment failure caused by exceed pressure.
◎With sanitary design and completely material of stainless steel, the valves is the best choice for protection of equipment in diary, food, beverage, pharmaceutical and fine chemical industries.
Operating Principles
Manual fast row safety valve features: you can open the valve manually, the spot cleaning (used together with the pump channel) can allow the fluid to pass through
◎Under normal operating conditions, the valve remains closed.
◎The specific pressure is set by adjusting the spring pressure nut.
◎When the pressure in the pipes is exceed the specific pressure, the valve will open automatically to make the liquid pass over,so that pressure in the pipeline is reduced.
◎The valve can be operated with handle . When the handle remains open on the operation spot, the detergent can flow though the flow valves.
◆Size：1"-4",DN25-DN100
◆KV Value：8.5-180m3/h
◆Max. temperature：130℃(EPDM)/266℉
◆Set pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special
Application
◎The safety valve is used to protect the flow pressure safety through pipes, pumps, accessories, pools, etc.
◎With sanitary and safe design, it's avoid operation danger and equipment failure caused by exceed pressure.
◎With sanitary design and completely material of stainless steel, the valves is the best choice for protection of equipment in diary, food, beverage, pharmaceutical and fine chemical industries.
Operating Principles
Pneumatic safety valve features: This type safety valve well suit for using automaticially pipline system.
◎Under normal operating conditions, the valve remains closed.
◎The specific pressure is set by adjusting the spring pressure nut.
◎When the pressure in the pipes is exceed the specific pressure, the valve will open automatically to make the liquid pass over,so that pressure in the pipeline is reduced.
◎The valve can be with handle in order to realize partial open. When the handle remains open on the operation spot, the detergent can flow though the flow valves.
◆Size：1"-4",DN25-DN100
◆KV Value：8.5-180m3/h
◆Max. temperature：130℃(EPDM)/266℉
◆Set pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special
Application
◎The safety valve is used to protect the flow pressure safety through pipes, pumps, accessories, pools, etc.
◎With sanitary and safe design, it's avoid operation danger and equipment failure caused by exceed pressure.
◎With sanitary design and completely material of stainless steel, the valves is the best choice for protection of equipment in diary, food, beverage, pharmaceutical and fine chemical industries.
Operating Principles
Manual fast row safety valve features: you can open the valve manually, the spot cleaning (used together with the pump channel) can allow the fluid to pass through
◎Under normal operating conditions, the valve remains closed.
◎The specific pressure is set by adjusting the spring pressure nut.
◎When the pressure in the pipes is exceed the specific pressure, the valve will open automatically to make the liquid pass over,so that pressure in the pipeline is reduced.
◎The valve can be operated with handle . When the handle remains open on the operation spot, the detergent can flow though the flow valves.
◆Size：1"-4",DN25-DN100
◆KV Value：8.5-180m3/h
◆Max. Temperature：130℃(EPDM)/266℉
◆Set Pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special
Application
◆The safety valve is used to protect the pressure flowing through pipes, pumps, accessories, pools, etc.
◆ The safety valve is designed to be healthy and safe to prevent danger and equipment failure due to pressure.
◆ Hygienic design and complete stainless steel manufacturing, this valve is the best choice for protection equipment in the dairy, food, beverage, pharmaceutical, fine chemical industry.
Principle of operation
◆ The valve remains closed under normal operating conditions.
◆ The valve is calibrated to a specific pressure by adjusting the spring with the pressure nut.
◆ When the pressure in the pipeline exceeds a certain pressure, the valve opens and allows fluid out, thereby reducing the pressure in the piping system.
Technical specifications
◆Specifications: 1"-4", DN25-DN100
◆KV value: 8.5-180m3/h
◆Maximum temperature: 130°C (EPDM)/266°F
◆Setting pressure: (0-3bar/0-6bar/6-10bar)
◆Material: 304/316L
◆ Certification: Safety Valve Special Manufacturing License
The pressure reducing valve is a very easy operation of the pressure control valve which provides precise control and easy installation and maintenance.
◆The valve can control the valve after pressure without needing for a pneumatic or electric control element.Pressure relief valve is a two-seat diaphragm controlled springloaded proportional control valve which is mainly used in food, beverage, brewery,pharmaceutical, chemical and other industries.
SIZE：1 "-3", DN25-DN80
Nominal pressure：PN2.5-10
Inlet pressure：8bar
Outlet pressure：0.3-5bar
Kv Value：4-70m3/h
Max. temperature：180℃
Medium: steam, liquids and gases
Connection mode : Clamps, welding, thread,Flange
Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500
Application
◎The safety valve is used to protect the flow pressure safety through pipes, pumps, accessories, pools, etc.
◎With sanitary and safe design, it's avoid operation danger and equipment failure caused by exceed pressure.
◎With sanitary design and completely material of stainless steel, the valves is the best choice for protection of equipments in diary, food, beverage, pharmaceutical and fine chemical industries.
Operating Principles
Manual fast row safety valve features: you can open the valve manually, the spot cleaning (used together with the pump channel) can allow the fluid to pass through
◎Under normal operating conditions, the valve remains closed.
◎The specific pressure is set by adjusting the spring pressure nut.
◎When the pressure in the pipes is exceed the specific pressure, the valve will open automatically to make the liquid pass over,so that pressure in the pipeline is reduced.
◎The valve can be operated with handle . When the handle remains open on the operation spot, the detergent can flow though the flow valves.
◆Size：1"-4",DN25-DN100
◆KV Value：8.5-180m3/h
◆Max. temperature：130℃(EPDM)/266℉
◆Set pressure：(0-3bar/0-6bar/6-10bar）
◆Material：304/316L
◆Certification: safety valve manufacturing license for special
◆The pressure reducing valve is a very easy operation of the pressure control valve which provides precise control and easy installation and maintenance.
◆The valve can control the valve after pressure without the need for a pneumatic or electric control element.Pressure relief valve is a two-seat diaphragm controlled spring loaded proportional control valve which is mainly used in food, beverage, brewery,pharmaceutical, chemical and other industries.
SIZE：1 "-3", DN25-DN80
Nominal pressure ：PN2.5-10
Inlet pressure：8bar
Outlet pressure：0.3-5bar
Kv Value：4-70m3/h
Max. temperature:180℃
media: steam, liquid, gas
Connection mode : Clamps, welding, thread,Flange
Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500
◆Miniature Constant Pressure Regulating Valve is a sanitary constant pressure valve to be applied to the food processing, beverage, pharmaceutical and other areas of the pipeline system.
◆Constant pressure design has two kinds to maintain a constant pressure function selection：
1) V type (inlet constant pressure); maintain constant pressure at the valve inlet. Such design is specially applied at the back of heat-exchanger. It is used as safety valve.
2) A type (Outlet constant pressure): maintain constant pressure at the outlet. Such design is used as the front of filling machine and bottle filling machine.
◆Size：3/4"-1.25",DN20-DN32
◆KV Value：10-21m3/h
◆Contact part of the material: 1.4404/316L, other parts: 304
◆Seal： EPDM+PTFE(FDA177.2600)
◆Connection mode : Clamps, welding, thread,ISO、DIN、SMS、RJT
◆Surface: sand blast outside, mirror finished inside (Ra≤0.6μm)
◆Working temperature: -10 to 150 ℃
◆Working pressure： 8 bar
◆The max working pressure: 12 bar Supercheuger(option)
◆Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500
◆Constant pressure valve is a sanitary constant pressure valve to be applied to the food processing, beverage, pharmaceutical, and other areas of the pipeline system.
◆Constant pressure design has two kinds to maintain a constant pressure function selection：
1) V type (Inlet constant pressure); maintain constant pressure at the valve inlet. Such design is specially applied at the back of heat-exchanger. It is used as safety valve.
2) A type (Outlet constant pressure): maintain constant pressure at the outlet. Such design is used as the front of filling machine and bottle filling machine.
◆Size：1.5"-3",DN40-DN65
◆KV Value：KV36m3/h to KV62m3/h
◆Contact part of the material: 1.4404/316L, other parts: 304
◆Seal： EPDM+PTFE(FDA177.2600)
◆Connection mode : Clamps, Welding, Thread,ISO、DIN、SMS、RJT
◆Surface: sand blast outside, mirror finished inside (Ra≤0.6μm)
◆Working temperature: -10 to 150 ℃
◆Working pressure： 8 bar
◆The max working pressure: 12 bar ,Supercheuger(option)
◆Certificate：3-A-64-00，PED/97/23/EC,FDA177.5500
The level gauge is mainly applied to the tank equipment. The two same gauges or two different gauges are assembled on the tank so that the liquid condition or capacity can be observed and the sample can be extracted.
◎Size:1/4",3/8",1/2",3/4"
◎Connections: thread, clamp, weld
◎Certificate: PED 97/23/EC,FDA 177.2600
◎when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
◎Thread; Nut; welding; Clamps
◎its mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the waster liquid
◎Operating principle：when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the,hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the
valve is closed.
◎Applicable temperature：－10℃ -130℃
◎Body material：AISI 304 AISI 316L
◎Seal material：PTFE
◎Connection: clamp, threaded, welded, Nut、
◆The valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
◆The valve is normally closed(by spring). The valve is open as soon as pushing the handle and closed when loosing up.
◆The design of completely drainage water is to avoid remains inside the valves. Technical specification
◆Material：316L
◆Temperature：130℃
◆Pressure：10bar
◆Straight sampling valve open inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
◎Operating principle:when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the,hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
◎Temperature：－10℃ -130℃
◎Body material： AISI 304 AISI 316L
◎Seal material： PTFE
◎Connection: clamp, thread, weld, Nut
Mini type diaphragm sampling valve manual / pneumatic operation, T type, L-type 3 way, U-type 3 way, straight type etc. These valves are mainly used in the solid-liquid sampling on biological systems, laboratories and other projects.
Design Features
●Size: 1/4 "-3/4"，DN6-DN15
●Diaphragm PTFE+EPDM/Silicong/EPDM/FPM
●Max temperature: 150℃, ok for CIP/SIP
●Max pressure: 10bar
●Standards: BPE 3A DIN ISO IDF
●Material：316L,1.4404
●Max temperature: - 30 to 150 ℃ (depending on seal material) (stainless steel actuator)
●Max temperature: - 30 to 130 ℃ (depending on seal material) (plastic actuator)
●Max pressure: one way (DELTA P = 100%)
Normally close EPDM 8 bar, PTFE 6 bar (option)
Normally close EPDM 6 bar, PTFE 4.5 bar (standard)
Normally open and double action EPDM 8 bar, PTFE 6 bar
●Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600
◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam.
◆Connection: clamp, welding, tank connector, multi-channel pipeline connector
◆Valve body material：AISI 316L（1.4404）ASME BPE 316L
◆Diaphragm：EPDM PTFE
◆Max. Temperature：130℃(EPDM)
◆Max. Temperature：150℃(PTFE)
◆Pressure： 10bar
◆Certificate：3-A-55-02，PED/97/23/EC
◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam
◆Application: The aseptic sampling valve is applied to beer, milk, beverage, fruit juice, pharmacy industries etc.
◆Connection: Welding, Clamp.
◆Valve body material：AISI 316L（1.4404）ASME BPE 316L
◆membrane：EPDM PTFE
◆Max. Temperature：130℃(EPDM)
◆Max. Temperature：150℃(PTFE)
◆Pressure：10bar
◆Certificate：3-A-55-02，PED/97/23/EC
◆The aseptic sampling valve is designed for sterilization before and after each sampling.
◆Open to Sampling-Valve is opened by rotating the handle
◆Closed to Sterilizing-The built-in spring closes the valve. Do Keep hose channel open while sterilizing and recommend to install a small safety valve on the outside if sterilizing by steam.
◆Appplication: The aseptic sampling valve is applied to beer, milk, beverage, fruit juice, pharmacy industries etc.
◆Connection: clamp, welding
◆Valve body material：AISI 316L（1.4404）ASME BPE 316L
◆Membrane：EPDM PTFE
◆Max. Temperature：130℃(EPDM)
◆Max. Temperature：150℃(PTFE)
◆Pressure：10bar
◆Certificate：3-A-55-02，PED/97/23/EC
Get A Free Quote
